Hey all, just sending out an update on #14. I've replaced the wheels and tires on all 4 corners using 2 piece 6" wheels and tires from BMI Karts. Front spindles need to be replaced with longer bolts and the real axle needs to have sleeves added to utilize a 3/4" keyed bore wheel. The ride difference is incredible. The tubed tires add that bit of cushion making the ride not as harsh. Next up I'll be looking into a way to improve acceleration. Top speed is fine, but off the line could be better. Finding a clutch to fit the axle could be difficult so another sleeve may be needed.
What have you been doing? How have you improved our Karts?
Support forum for our first kit: the PlyFly go-kart
1 post • Page 1 of 1