Drawer Slide

Support forum for our first kit: the PlyFly go-kart
Post Reply
jgerstemeier
Posts: 9
Joined: Wed Oct 07, 2015 7:20 pm

Drawer Slide

Post by jgerstemeier » Tue Dec 22, 2015 4:13 pm

Does the rack get screwed to the drawer slide with only 2 screws? What am I missing?

Dave
Posts: 33
Joined: Mon Aug 24, 2015 1:52 pm
Location: Middletown, RI
Contact:

Re: Drawer Slide

Post by Dave » Tue Dec 22, 2015 5:38 pm

There should be a bag of 9 screws that came attached to the drawer slide. There are 3 pre-drilled holes in the frame, and 4 in the rack.
Dave
Flatworks Engineer

kbliss
Posts: 1
Joined: Sun Jan 10, 2016 4:28 pm

Re: Drawer Slide

Post by kbliss » Sun Feb 21, 2016 8:42 pm

I have the same question, I have 4 holes on frame for drawer slide, they line up perfectly... When I go to attach rack, only 2 holes are accessible, I'm doing something wrong, but I can't figure it out...

Dave
Posts: 33
Joined: Mon Aug 24, 2015 1:52 pm
Location: Middletown, RI
Contact:

Re: Drawer Slide

Post by Dave » Mon Feb 22, 2016 9:48 pm

Could you take a picture? Make sure the rack is oriented correctly (correct side up). The marks on the gear teeth for alignment should be facing up.
Dave
Flatworks Engineer

Post Reply