Updates!

Support forum for our first kit: the PlyFly go-kart
Post Reply
PlyFly#14
Posts: 35
Joined: Fri Aug 21, 2015 8:25 pm
Location: New Jersey
Contact:

Updates!

Post by PlyFly#14 » Tue Aug 16, 2016 2:59 pm

Hey all, just sending out an update on #14. I've replaced the wheels and tires on all 4 corners using 2 piece 6" wheels and tires from BMI Karts. Front spindles need to be replaced with longer bolts and the real axle needs to have sleeves added to utilize a 3/4" keyed bore wheel. The ride difference is incredible. The tubed tires add that bit of cushion making the ride not as harsh. Next up I'll be looking into a way to improve acceleration. Top speed is fine, but off the line could be better. Finding a clutch to fit the axle could be difficult so another sleeve may be needed.

What have you been doing? How have you improved our Karts?

Josh
Plyfly#14
I need a bigger garage

Post Reply